S5810-48TS-P, a next-gen switch with 48x 10/100/1000Mbps PoE ports and 4x 1G/10G uplink ports. Pre-loaded with PicOS®, equipped with comprehensive SDN features and compatible AmpCon™ management software, providing a more resilient, programmable, and scalable networking operating system (NOS) at a lower TCO.
This switch provides a max power budget of 740W for all PoE ports and up to 30W for every single PoE port respectively. It adopts cutting-edge Broadcom chips to deliver 176 Gbps switching capacity and 132 Mpps forwarding rate. It is packed with redundant hot-swappable power supplies and variable-speed axial fans for superior processing performance. S5810 series switches are ideal for acting as an aggregation of large campus networks and core of small to medium size enterprise networks.
Click to open expanded view
S5810-48TS-P, 48-Port Gigabit Ethernet L3 PoE+ Switch, 48 x PoE+ Ports @740W, with 4 x 10Gb SFP+ Uplinks, Support MLAG, Broadcom Chip, PicOS®
48-Port Gigabit Ethernet L3 PoE+ Switch, 48x PoE+ Ports @740W, with 4x 10Gb SFP+ Uplinks, Broadcom Chip, PicOS®
Storage: -40 to 70ºC (-40 to 158°F)
Software Spotlights
Support MLAG
Support Virtual Router Redundancy Protocol (VRRP)
IPv4/IPv6 Dual Protocol Stack
Unicast Routing
Support 802.1p, IP ToS, traffic filtering, SP, WRR
Support Ethernet Ring Protection Switching (ERPS)(G.8032)
Support AmpCon™ Management Platform for Centralized ZTP, Configuration Management
Support DHCP Server, L2 Multicast Functions
Advanced Network Monitoring Using SFlow
IPv4/IPv6/MAC/ARP ACL
Support IGMP snooping, IGMP, MLD, PIM, MSDP
Support SNMP (Managed by Zabbix), RMON, log and configuration backup
Support Test Automation with PicOS-V
Support hardware-based IPv6 ACLs
Support hardware CPU protection mechanism
Support DHCP snooping
Support the IP-based Telnet access control
Support the Secure Shell (SSH) and SNMPv3
Connectivity Solutions
Features
Experience the simplicity of managing your network with the intuitive AmpCon™ platform, which unifies network device management, realizes zero-configuration automated deployment and License management of PicOS® switches.
Try PicOS-V free >
More about AmpCon™ >
Using the same model of switches, providing a distributed and redundant architecture for uninterrupted service upgrades, and fault isolation for minimized impact.
RJ45 Ports | 48x 100/1000BASE-T | 24x 1000BASE-T | 48x 1000BASE-T | 8x 1000BASE-T (8 combo) | — |
SFP Ports | — | 4x 1G SFP (4 combo) | — | 28x 1G SFP | 48x 1G SFP |
SFP+ Ports | 4x 10G SFP+ | 4x 10G SFP+ | 4x 10G SFP+ | 4x 10G SFP+ | 4x 10G SFP+ |
PoE Ports | PoE+/PoE | — | — | — | — |
Management Layer | L3 | L3 | L3 | L3 | L3 |
MLAG | |||||
1+1 Hot-swappable Power Supplies | |||||
VLAN, QoS, IGMP Snooping |
Videos
48-Port Gigabit Ethernet L3 PoE+ Switch, 48x PoE+ Ports @740W, with 4x 10Gb SFP+ Uplinks, Broadcom Chip, PicOS®
S5810-48TS-P, a next-gen switch with 48x 10/100/1000Mbps PoE ports and 4x 1G/10G uplink ports. Pre-loaded with PicOS®, equipped with comprehensive SDN features and compatible AmpCon™ management software, providing a more resilient, programmable, and scalable networking operating system (NOS) at a lower TCO.
This switch provides a max power budget of 740W for all PoE ports and up to 30W for every single PoE port respectively. It adopts cutting-edge Broadcom chips to deliver 176 Gbps switching capacity and 132 Mpps forwarding rate. It is packed with redundant hot-swappable power supplies and variable-speed axial fans for superior processing performance. S5810 series switches are ideal for acting as an aggregation of large campus networks and core of small to medium size enterprise networks.
Storage: -40 to 70ºC (-40 to 158°F)
Software Spotlights
Support MLAG
Support Virtual Router Redundancy Protocol (VRRP)
IPv4/IPv6 Dual Protocol Stack
Unicast Routing
Support 802.1p, IP ToS, traffic filtering, SP, WRR
Support Ethernet Ring Protection Switching (ERPS)(G.8032)
Support AmpCon™ Management Platform for Centralized ZTP, Configuration Management
Support DHCP Server, L2 Multicast Functions
Advanced Network Monitoring Using SFlow
IPv4/IPv6/MAC/ARP ACL
Support IGMP snooping, IGMP, MLD, PIM, MSDP
Support SNMP (Managed by Zabbix), RMON, log and configuration backup
Support Test Automation with PicOS-V
Support hardware-based IPv6 ACLs
Support hardware CPU protection mechanism
Support DHCP snooping
Support the IP-based Telnet access control
Support the Secure Shell (SSH) and SNMPv3
Experience the simplicity of managing your network with the intuitive AmpCon™ platform, which unifies network device management, realizes zero-configuration automated deployment and License management of PicOS® switches.
Try PicOS-V free >
More about AmpCon™ >
Using the same model of switches, providing a distributed and redundant architecture for uninterrupted service upgrades, and fault isolation for minimized impact.
RJ45 Ports | 48x 100/1000BASE-T | 24x 1000BASE-T | 48x 1000BASE-T | 8x 1000BASE-T (8 combo) | — |
SFP Ports | — | 4x 1G SFP (4 combo) | — | 28x 1G SFP | 48x 1G SFP |
SFP+ Ports | 4x 10G SFP+ | 4x 10G SFP+ | 4x 10G SFP+ | 4x 10G SFP+ | 4x 10G SFP+ |
PoE Ports | PoE+/PoE | — | — | — | — |
Management Layer | L3 | L3 | L3 | L3 | L3 |
MLAG | |||||
1+1 Hot-swappable Power Supplies | |||||
VLAN, QoS, IGMP Snooping |
Questions & Answers
Customer Reviews
Resources
US$1,899.00