Torna a Prodotto
Tutti (8)
Recensioni con immagini (1)
Grandi prodotti (2)
Affidabilità (1)
Servizi alla clientela (1)
P***y
United Kingdom
September 07, 2023
All the years spent killing my fingers with traditional rack mounts and these were brilliant, so easy to install.
Acquisto verificato
Utile 0
Commento 0T***t
United States
December 18, 2022
Pros:
1) No tools needed, easy to install and remove
2) Pins helps a lot then mounting hardware where you need to hold it
3) Pin is in the middle of square hole making you sure if you left one unit between two used - it's enough space and hardware not slightly shifted up or down
4) Lightweight (if you need to carry them in backpack)
Cons:
1) Not fit in some racks (need some tool to push it harder)
2) Three parts instead of standard two, yellow fixate easy to drop and loose
3) Expensive
1) No tools needed, easy to install and remove
2) Pins helps a lot then mounting hardware where you need to hold it
3) Pin is in the middle of square hole making you sure if you left one unit between two used - it's enough space and hardware not slightly shifted up or down
4) Lightweight (if you need to carry them in backpack)
Cons:
1) Not fit in some racks (need some tool to push it harder)
2) Three parts instead of standard two, yellow fixate easy to drop and loose
3) Expensive
Acquisto verificato
Utile 0
Commento 0W***u
Japan
April 20, 2022
It's easy to install and hold the devices steadily.
But the instruction manual on the back of packages is not kind enough, it's missing some tips such as the direction of yellow parts.
I hope the manual improved or paste links to instruction movie.
But the instruction manual on the back of packages is not kind enough, it's missing some tips such as the direction of yellow parts.
I hope the manual improved or paste links to instruction movie.
Acquisto verificato
Utile 0
Commento 0J***z
Australia
February 27, 2022
Rackstuds are the real replacement to traditional cagenuts. Highly recommended.
Acquisto verificato
Utile 0
Commento 0J***e
United States
December 05, 2021
If you enjoy your fingers more when they aren't bleeding, get these. They've held up to everything we've thrown at them with zero issues. Bonus - Compared to a traditional cage nut, these hold equipment tighter to the rack face preventing gear that isn't full depth from drooping as far in the back.
Acquisto verificato
Utile 7
Commento 0M***l
Spain
October 09, 2021
I love using these over the traditional rack nuts and bolts. Easy hand install and removal. Using these to hold the majority of my rack mounted hardware.
Acquisto verificato
Utile 4
Commento 0J***y
Senegal
August 22, 2021
Rackstuds are brilliant. The studs snap into place easily, and they are easy to remove. Also, equipment goes right onto the studs, so you don't have to strain holding the equipment with one hand while trying to get a screw started with the other. Great customer service, too.
Acquisto verificato
Utile 4
Commento 0M***m
United States
May 07, 2021
Truly the best way to work with a rack that requires cage nuts. I like them so much I have been converting my racks that were already installed over to these because of their convenience and strength. They will not let you down and I cannot recommend them enough. The caps are 10mm hex so I do recommend purchasing a 10mm nut driver to keep along with the bag in your rack drawer. It is helpful for rackmount things like cable ducts that stick out and make it hard to get your fingers to the mounting holes.
A NOTE OF CAUTION: you absolutely have to check your rail thickness before purchasing. The reds will only fit rails that are 2.2mm or less. There is no wiggle room with that. I have some racks with 2.35mm and while 0.15mm difference seems miniscule, it is enough for the red version to not work. There is a violet version available that is advertised as _=2.7mm and the mfg has assured me that these will work just fine on a 2.35mm rack.
A NOTE OF CAUTION: you absolutely have to check your rail thickness before purchasing. The reds will only fit rails that are 2.2mm or less. There is no wiggle room with that. I have some racks with 2.35mm and while 0.15mm difference seems miniscule, it is enough for the red version to not work. There is a violet version available that is advertised as _=2.7mm and the mfg has assured me that these will work just fine on a 2.35mm rack.
Acquisto verificato
Utile 5
Commento 0